Threaded Stud Anchor - 316 Grade Stainless Steel
Threaded Rod with Stud Nut for Secure Installation into Masonry and Concrete
M8, M10, M12 and M16 thread stud anchors for installation with injection resin to create a strong anchor point.
Threaded Stud Anchor
Options | Grade | Thread | d (mm) |
L (mm) |
Code | Price (inc VAT) | Quantity |
---|---|---|---|---|---|---|---|
M8 x 110mm | 316 | M8 | 8 | 110 | 19.4408.110.14 | £2.88 | |
M8 x 205mm | 316 | M8 | 8 | 205 | 19.4408.205.14 | £5.64 | |
M10 x 130mm | 316 | M10 | 10 | 130 | 19.4410.130.14 | £3.24 | |
M12 x 155mm | 316 | M12 | 12 | 155 | 19.4412.155.14 | £5.28 | |
M12 x 175mm | 316 | M12 | 12 | 175 | 19.4412.175.14 | £6.12 | |
M12 x 265mm | 316 | M12 | 12 | 265 | 19.4412.265.14 | £9.36 | |
M16 x 205mm | 316 | M16 | 16 | 205 | 19.4416.205.14 | £10.92 |
Tip: To view the product code and full product table on mobile please tilt your device to landscape.
Key Features:
316 grade stainless steel. | |
Drill is required for installation. | |
Requires use of a Chemical Anchor Resin for installation. |
Threaded rod and stud nut manufactured from 316 (marine) grade stainless steel.
Suitable for both indoor and outdoor applications
Installation is quick and easy with the use of a drill and mortar injection resin.
Masonry Drilling Advice
- M8 stud anchor requires 10mm diameter fixing hole.
- M10 stud anchor requires 12mm diameter fixing hole.
- M12 stud anchor requires 14mm diameter fixing hole.
- M16 stud anchor requires 18mm diameter fixing hole.
Dimension Information:
PDF Data Sheet
Download Threaded Stud Anchor Dimension Information
Installation Advice
1. Drill fixing hole. |
2. Clean with air pump to remove dust and debris. |
3. Clean with brush to remove any rough debris. |
4. Clean again with air pump to achieve the perfect fixing surface. |
5. Insert chemical anchor injection resin. |
6. Insert anchor - Rotate to achieve a solid fixing. |
7. Allow to set - Approximately 45 minutes, dependent on temperature. |
8. Finish with screw. |
You may be interested in ...
Chemical Anchor Resin bonding agent.
Hand held Air Pump to remove dust.
Cleaning Brush to remove debris.