Bar Railing Bracket - Centre Pillar - Brass Finish

Centre Post Support with PVD Coated Brass Finish for Tubular Bar Railing

Bar railing bracket in a high quality polished brass effect finish with central through hole for centre/mid position, designed to support 38.1mm and 50.8mm Ø tube.

Bar Railing Bracket - Centre Pillar - Brass Finish

Bar Railing Bracket - Centre Pillar - Dimensions

Bar Railing Bracket - Centre Pillar - Installation

Bar Railing Bracket - Centre Pillar

Options	Finish	Ø (mm)	B (mm)	D (mm)	C (mm)	H (mm)	H2 (mm)	Code	Price (inc VAT)	Quantity
38.1mm Ø Tube	Brass	38.1	28	60	40	65	87	11.0602.038.22	£14.02	In stock
50.8mm Ø Tube	Brass	50.8	28	70	50	80	108	11.0602.050.22	£17.76	In stock

Tip: To view the product code and full product table on mobile please tilt your device to landscape.

Key Features :

	Brass effect finish (Not solid brass).
	PVD coated Zamak construction.
	Option for 38.1mm diameter tube.
	Option for 50.8mm diameter tube.
	Countersunk Torx head screws are supplied for installation.
	For installation you will require a few simple household tools.

Bar railing posts to accept 38.1mm (1.5 inch) and 50.8mm (2 inch) diameter tube, suitable for attaching to the upper side of counters and bars to provide a strong and secure grab/handrail support.

Manufactured from Zamak with a PVD coating to give a hard-wearing brass effect finish (Not solid brass).

Suitable for indoor use only.

Two countersunk fixing points for secure attachment.

Screw fixings supplied for direct installation on to hardwood surfaces.

Quick and easy installation with the use of a few household tools.

Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.

Designed for use on horizontal surfaces only. Do Not use as a handrail wall bracket.

We would always recommend spacing bar railing brackets no more than 700 mm apart.

Important

Bar railing brackets should only be matched with similar design style, ie: Ball Pillar to Ball Pillar, this is due to differing heights between styles.

Zamak Construction - PVD Coating

Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.

PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.

Installation Advice

1. Start by marking the fixing position of the centre pillar and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).

Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.

2. Simply re-tighten the grub screw to secure tube firmly in position. To finish open tube ends neatly you can opt for a stylish End Cap or use an End Pillar.