Sta-Lok Stud - UNF - Swageless Rigging - DIY Terminal

Sta-Lok Stud - UNF Thread - 316 Stainless Steel

Sta-Lok stud terminal with UNF thread, reusable alternative to swage. Supplied with 1x19 wedge as standard.

Sta-Lok Stud - UNF - Swageless Fitting

Options Wire
(mm)
A
(mm)
B
(mm)
Thread
(UNF)
Code Price (inc VAT) Quantity 
3mm, 1/4" Stud 3 64.3 55.6 1/4 036-03 £29.35
7-10 days
4mm, 1/4" Stud 4 65 55.5 1/4 036-04-1/4 £31.79
7-10 days
4mm, 5/16" Stud 4 67.5 58.7 5/16 036-04 £31.79
7-10 days
5mm, 5/16" Stud 5 70.6 58.7 5/16 036-05-5/16 £37.66
7-10 days
5mm, 3/8" Stud 5 78 66.7 3/8 036-05 £37.66
7-10 days
6mm, 3/8" Stud 6 84 66.7 3/8 036-06-3/8 £48.68
7-10 days
6mm, 7/16" Stud 6 93 74.6 7/16 036-06 £48.68
7-10 days
7mm, 7/16" Stud 7 95 74.5 7/16 036-07-7/16 £59.71
7-10 days
7mm, 1/2" Stud 7 97 81 1/2 036-07 £59.71
7-10 days
8mm, 1/2" Stud 8 98 81 1/2 036-08 £70.87
7-10 days
8mm, 5/8" Stud 8 110 95.2 5/8 036-08-5/8 £70.87
7-10 days
10mm, 5/8" Stud 10 111 95.2 5/8 036-10 £100.25
7-10 days
10mm, 3/4" Stud 10 129 123.8 3/4 036-10-3/4 £105.54
7-10 days
12mm, 3/4" Stud 12 139 123.8 3/4 036-12 £246.30
7-10 days
12mm, 7/8" Stud 12 168 139.7 7/8 036-12-7/8 £246.30
7-10 days
14mm, 7/8" Stud 14 170 139.7 7/8 036-14 £286.12
7-10 days
16mm, 1" Stud 16 172 139.7 1 036-16 £357.72
7-10 days
19mm, 1 1/8" Stud 19 213 171.5 1 1/8 036-19 £775.15
7-10 days
22mm, 1 1/4" Stud 22 275 227 1 1/4 036-22 £1,071.58
7-10 days
26mm, 1 3/8" Stud 26 284 232 1 3/8 036-26 £1,294.39
7-10 days

Tip: To view the product code and full product table on mobile please tilt your device to landscape.

Key Features:

316 Stainless Steel
316 grade stainless steel.
UNF Thread
UNF thread.

Sta-Lok self fit stud terminals are supplied with 1x19 wedges as standard.

Wedges for 7 strand & compacted strand wire ropes can be purchased separately.

Right hand thread only.

No pre-measurement needed.

Quick and easy to install, only basic hand tools required.

Guaranteed stronger than wire rope.

Suitable for right hand and left hand lay wire rope.

Supplied with split pin.

Manufactured from 316 grade stainless steel.

Made In Britain

Dimension Information:

PDF Data Sheet

Download Data Sheet

Download Sta-Lok Stud UNF Dimension Information


Sta-Lok Turnbuckles

Sta-Lok Wire Connector Terminals - Technical Information - How to assemble

Sta-Lok Terminal Instruction 1

1. Cut wire rope and slide socket component over wire.

Wind tape around wire approx 12" (300mm) from end. This will prevent the socket from sliding down the wire.

TIP: If using a hacksaw to cut your wire rope, wind tape around wire to ensure a neat cut.


Sta-Lok Terminal Instruction 2

2. Unravel outer strands 2" to 3" (50-76mm) to expose central core.

TIP: Use a screwdriver to prise initial strands out of position.


Sta-Lok Terminal Instruction 3

3. Slide wedge component over central core of wire rope.


Sta-Lok Terminal Instruction 4

4. Reposition outer strands.

Turn outer strands either clockwise or anti-clockwise, depending on the lay of the wire, around the wedge. Ensure approx 1/8" (2-3mm) of the central core protrudes from the end of the wedge.

Outer strands should be evenly situated around the wedge. Care should be taken to ensure that a strand does not slip into the slit of the wedge.

TIP: Push the socket towards end of wire, while repositioning the outer strands, this will help control. When wire strands are in position, push socket firmly, as indicated to hold wires in position.


Sta-Lok Terminal Instruction 5

5. Final assembly.

Ensure former component sits in bottom of end fitting. Screw socket assembly into end fitting and tighten with spanners. The assembly is now complete.

TIP: Undue force is not required to terminate the wire.

Fitting instructions are supplied with each Terminal.

Select your product
Quantity
Show prices